| |
What County Data Does NASS Publish?
There are two independent sets of data collected and published by the National Agricultural Statistics Service (NASS) which contain county crop and livestock information.
(1) The Census of Agriculture is conducted every five years and, by definition, is a complete accounting of the crops and livestock produced on all farms and ranches and current inventories of livestock on all farms for the Census year.
(2) NASS prepares and publishes crop annual county data to support the USDA farm program (major grains, oilseeds, edible beans, sugar crops, cotton and tobacco). County data are prepared and published for additional commodities through our cooperator program (hay, potato, minor oil seeds, and fruit), with each of the state departments of agriculture. The cooperator program also supports the annual livestock inventory data by county. The annual county data are based on reports from a sample of farms and ranches.
(Note: A national program for cattle inventory was initiated in 2001.)
What Are Districts?
Agricultural Statistics Districts (ASD) are defined groupings of counties in each State, by geography, climate, and cropping practices. The geographic attributes include soil type, terrain, and elevation (mountains). The basic components of climate are mean temperature, annual precipitation and length of growing season. These factors influence the crops grown, the need to conserve soil moisture, and the use of irrigation (cropping practices).
Return to Top
What is the Census of Agriculture and It's Frequency?
The Census of Agriculture was conducted by the Census Bureau, Department of Commerce beginning with the 1840 census through the 1992 census. In 1997, the responsibility for the Census of Agriculture was transferred to the National Agricultural Statistics Service (NASS), USDA. The Census of Agriculture is conducted every five years and, by definition, is a complete accounting of the crops and livestock produced on all farms and ranches for the Census year and the inventories of livestock on all farms. The Census also collects information concerning operator characteristics, demographics, and income and expenses. For the 1997 Census, a response was received from almost 90 percent of the farm operators. A sample of the non-respondents was selected and interviewed and their data was expanded to represent this group. The Census information includes data for most commodities produced on U.S. farms and is published by State and county. The data are also summarized by operator/farm characteristics (operator age, etc., and acres in farm, etc.), to the county level.
How is the NASS Annual Program for Crop and Livestock Production Conducted?
NASS's annual program focuses on agricultural production for mainstream crops, livestock and associated inventories. The program is based on a series of sample surveys to collect farm level data to produce the State and U.S. crop forecasts and estimates published in the NASS Agricultural Statistics Board reports. NASS produces approximately 400 reports each year with information released on a weekly, monthly, quarterly, or annual basis depending on the commodity program. The largest single survey NASS conducts each year is the June Agricultural Survey. This survey has two parts - a list sample frame and an area sample frame.
What is an area frame sample?
The area frame, which is essentially the entire land mass of the United States, ensures the inclusion of the entire U.S. farm population. The land in each State is classified into land use categories by intensity of cultivation using a variety of map products, satellite imagery, and computer software packages. These land use classifications range from intensively cultivated areas, to marginally cultivated or grazing areas, to urban areas. The land in each use category is then divided into segments ranging from about one square mile in cultivated areas to 0.1 square mile in urban areas. About 10,000 sample segments are selected, at varying rates, by land use classification. Approximately 50,000 operators who farm in these segments will be interviewed during the June Agricultural Survey.
What is a list frame sample?
The list frame contains the names and addresses of all known farms and ranches NASS has obtained from various sources. Each farm is classified by operation characteristics such as number of corn acres or number of cattle. Large farms (e.g., Iowa farms with more than 5,000 acres of cropland) are sampled at high rates, while small farms (e.g., farms with less than 50 acres of cropland) are randomly selected at very low rates. A sample of about 75,000 farms is selected for each of the quarterly Crops and Hogs (June, September, December and March) surveys. Sample sizes for the January Cattle and Sheep surveys are 50,000 and 10,000 farms, respectively.
Data from the area and list frame samples are expanded and combined using multiple-frame statistical methodology which ensures that all farms are represented in the summary totals and that each farm is included only once. These samples are designed to produce estimates at the State and/or U.S. levels only.
Return to Top
What is the Annual County Data Program?
The end-of-season December survey is supplemented with a mailing to a county sample of about 300,000 farm operators (~15 percent of the 2.19 million farms) to collect information to support the County Data program. The responses from this supplemental sample are combined with those from the December Quarterly Survey and aggregated to a County Summary.
The county data are "assembled" starting from the State estimate and working back to the county and are published by each NASS Field Office and loaded to the On-Line-Database (Published Estimates or Quick Stats Data Base). The following is a brief outline of the process to produce the annual county data, using corn for grain as an example. The State Corn for Grain estimate, published in the Crop Production Summary each January, is the total to which the counties must add. The County Summary, in combination with administrative data from various sources (other USDA agencies, cotton ginners, etc.), is the basis for the annual county data for crop acreage, yield and production, and livestock inventories. Agricultural Statistics Districts are defined groupings of counties in each State, by geography, climate, and cropping practices. Agricultural Statistics District (ASD) totals are set first because the greatest data accuracy occurs with a larger number of reports. The sum of the ASD's must equal the State estimate. After the ASD's are set, the county values in each district are set. The counties in each district must sum to the district total.
Are data published for all counties?
Because NASS uses sample surveys, it may not be possible to publish information for all counties. In fact, SSO's generally establish a minimum value for publication. In most cases, unpublished (minor) counties are grouped to a Combined Counties total within each ASD. In addition to minor counties, concentrations of animals (or birds) may limit the publication of livestock inventories for some counties to avoid disclosure of individual operations. Some States publish selected species/class inventories or individual data items at the ASD level only to avoid disclosure and still provide information for major production areas within the State.
Are all commodities included in the Annual County Data program?
National Program. The national portion of the County Data program focuses on
the major grains, oilseeds, cotton, dry edible beans, sugar crops and tobacco.
Beginning in 2001, cattle inventory was added to the national program. Cooperative
agreements with other USDA agencies and general support for the Farm Program
provide the funding for this group of commodities.
State (Cooperator) Program. NASS maintains cooperative
agreements with each State Department of Agriculture and/or Land Grant University
to conduct a joint statistics program that supports both the national and State
needs. The cooperative agreements eliminate duplication of effort and produce
a cost efficient information program. A significant portion of the County Data
is the product of these agreements. The livestock and poultry (cattle, hogs,
chickens, etc.) inventories and hay, potato (Irish), sweet potato, apple, and
peach production are prepared and published (State Information) as required by each State's Department of Agriculture program. Local (State) funding may limit information availability for a specie(s), commodity, data item(s) or year(s), including data for some major producing States.
Return to Top
Why aren't all States available for some commodities?
The livestock county data and data for hay, potatoes (Irish), sweet potatoes, apples and peaches are prepared as required by each State's Department of Agriculture program. Local (State) funding may limit data availability for a specie(s), commodity, data item(s) or year(s), including some major production States. All available data are included in the On-Line-Database. Only States preparing county or Agricultural Statistics District (ASD) data have entries in the Database.
If data are needed for all counties for a selected commodity, the Census of Agriculture most likely will have data for All States. However, some counties may not be published to avoid disclosure of individual operations. The general guideline for determining disclosure is less than three (3) reports for the item or one operations has more than 60 percent of the total. The Census county data are available on CD-ROM as a custom query database.
Return to Top
Publication exceptions for Livestock data.
The States with no cooperator program are listed by species. The data items
available vary by State based on the cooperator program.
Cattle & Calves and Milk Production: California, Colorado, Connecticut, Delaware, Iowa, Maine, Massachusetts, New Hampshire, Rhode Island, South Dakota, and Vermont.
Program Change: NASS instituted a National program for major cattle producing states beginning with the 2001 Inventory. Several of the states listed above will have annual county data beginning with the year 2001.
Hogs and Pigs: California, Colorado, Connecticut, Delaware, Florida, Idaho, Iowa, Louisiana, Maine, Maryland, Massachusetts, Nevada, New Hampshire, Rhode Island, South Dakota, Utah, Vermont, and Wyoming.
Sheep & Lambs and Wool Production: Alabama, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Hawaii, Indiana, Iowa, Louisiana, Maine, Maryland, Massachusetts, Mississippi, New Hampshire, North Carolina, Rhode Island, South Carolina, South Dakota, Tennessee, and Vermont.
Chickens and Egg Production: Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Idaho, Illinois, Indiana, Iowa, Louisiana, Maine, Maryland, Massachusetts, Mississippi, Missouri, Nebraska, Nevada, New Hampshire, New Jersey, New York, North Dakota, Ohio, Rhode Island, South Dakota, Tennessee, Utah, Vermont, Virginia, Washington, and Wyoming.
Return to Top
Does NASS Update the County Data in Later Years?
NASS has a policy of reviewing data the year after initial publication. Based on new administrative data, States may revise the previous year of county data. These changes are made at the same time the "current year" data are prepared. Following the Census of Agriculture, every five years, NASS reviews the data for intervening years and revises data when appropriate. Generally, revisions are small and a limited number of States and years are changed for any commodity.
When Does NASS Publish the Annual County Data?
The County Data are prepared beginning after the publication of the Crop Production Summary in January. The State totals for some commodities are finalized and published in the Crop Production (April, May and June) and other reports. We expect data for all States to be loaded on the "anticipated date." However, due to unforeseen circumstances, some States may not meet the schedule. Therefore, the All States Available column will be completed when all data are available.
Crops
|
|
|
|
|
All Wheat |
February 15 |
Feb.15 except KY, IL, UT, NM: NM & UT available on Feb.20, IL on Mar.5, KY on Mar. 13 |
Durum Wheat |
February 15 |
February 15 |
Other Spring Wheat |
February 15 |
February 15 |
Winter Wheat |
February 15 |
Feb. 15 except KY, IL, UT, NM; NM & UT available on Feb. 20, IL on Mar. 5, KY on Mar. 13 |
Barley |
February 15 |
February 15 |
Oats |
February 15 |
February 15 |
Rye |
February 15 |
February 15 |
Sorghum |
March 3 |
Mar. 6, except AL & CO; AL available on Mar. 11, CO on Mar. 7 |
Sunflower, All, Non-Oil & Oil |
March 3 |
March 6 |
Corn for Grain & Silage |
March 6* |
Mar. 6 except PA
PA available on Mar. 11
|
Soybeans |
March 6* |
March 6 |
Canola |
March 14 |
March 14 |
All Hay, Alfalfa & Other (IL, MD, MN,
MT, NE, PA, WI, WY) |
April 18 |
|
Forage - All, Alfalfa (PA, WI) |
April 18 |
|
Dry Edible Peas |
April 16 |
|
Lentils |
April 16 |
|
Peanuts |
May 13 |
|
All Rice |
June 5 |
|
Flaxseed |
June 5 |
|
Tobacco |
June 5 |
|
Upland Cotton & Amer-Pima Cotton
|
June 20, 3:00 ET |
|
All Dry Edible Beans |
June 30 |
|
All Hay, Alfalfa & Other (All Other
States) |
June 30 |
|
Sugarcane for Sugar |
June 30 |
|
Sugarbeets |
June 30 |
|
Process Vegetables
(Sweet Corn, Tomatoes, Snap Beans & Green Peas) |
June 30 |
|
Sweet Potatoes |
June 30 |
|
Potatoes |
September 26 |
|
Apple Production |
September 26 |
|
Peaches |
September 26 |
|
*Preliminary Estimates for Corn and Soybean County Estimates will be available for Iowa and Illinois on Feb. 15, for Indiana, Michigan, North Dakota and Ohio on February 28, and for Pennsylvania on February 29. Final Estimates for these states will be available on Quick Stats March 6 at 3:00 p.m. ET.
Return to Top
Livestock
|
|
Commodity |
Anticipated Release Date |
All States Available |
Cattle & Calves |
May 22 |
|
Milk Production |
August 7 |
|
Hogs & Pigs |
August 7 |
|
Sheep & Lambs |
August 7 |
|
Chickens |
August 7 |
|
Egg Production |
August 7 |
|
Goats |
August 7 |
|
Return to Top
Browser Issues for Microsoft Internet Explorer Users
Internet Explorer Browser
The Microsoft Internet Explorer (v5.00) browser has a problem handling the html code returned by the Database. Microsoft has recognized the problem and version 5.01 appears to handle the code.
If you have version 5.00, you can either upgrade to 5.01 or make a setting change to your current version. Following are the steps:
1. On the browser menu, click on Tools
2. Click on Internet Options
3. Select Advanced
4. Locate http 1.1 - turn off (remove the check mark)
5. Click OK
6. It is necessary to Exit and Restart the browser for this change to be active.
Return to Top
I'm having problems opening the download file into my spreadsheet software.
Data Handling
Using Lotus for DOS,
-------------
/F(ile),I(mport),N(umbers).
You will then be able to point at the data file you wish to import.
(Press the [Esc] key to change the drive/directory and file type to
*.CSV.) The data should now be in columns.
Using Lotus for Windows ,
-----------------
File,Open
In the Open a File dialog box, change the file type to Text.
Select the drive and directory where the data files are located.
Click on Text Options and select "comma" in the Separator window.
Click OK.
When you return to the Open a File dialog box,
Click OK.
The data should now be in columns.
Return to Top
What do I need to decompress the download file?
File Decompression
These files require a current version of unzipping or decompression software otherwise the unzip may result in a file with no data. This problem is known to exist with some versions of WinZip. If using WinZip, please upgrade to version 7.0 or higher.
You can also use a free decompression program such as UnZip which is available for most operating systems.
|
